DIYers: PaiBoat Extra Cut (Compound) | PaiBoat Speedy Fix (Polish) | PaiBoat Easy Gloss (AIO) | PaiBoat Flash Touch
Enthusiasts: Driven Finish Restorer (Polish) | Driven Marine Polish (Cleaner & Sealant) | Driven Quick Spray (Detailer)
Professionals: PaiBoat Just 1 (One-Step Compound) | PaiBoat Topfinish 2 (Polish) | PaiBoat UV Shield (Sealant & Wax)
5-Step Finish Care Cycle: 1. Wash | 2. Clean | 3. Correct (Compound) and/or Perfect (Polish) | 4. Protect | 5. Maintain
PaiBoat Nauticlean - This is a polishing cleaner, specially created for yacht and boat washing. It easily removes stains caused by natural elements and exhaust gas, insects, grease and bird droppings. Unlike many other boat cleaners on the market, Nauticlean is a non-acid formula, which is not aggressive for the gelcoat and does not strip sealant or wax protection (hull). Rather, through its innovative components it is able to shine the surface and leave a lasting protection and anti-static waterproof film, which prevent dirt accumulation. It generates a minimum quantity of foam and it may even be used with seawater (rinse with clean water). Thanks to the total absence of solvents, phosphates and colourants, it is a biocompatible product.
Driven Wash Concentrate safely cleans all automotive and marine finishes without stripping polish or wax. Activated by water, this unique combination of cleaning agents foams away surface contaminants while brightening and nourishing the finish with a full spectrum of protective polymers. Completely biodegradable and pH balanced.
SmartClay (Bar) is a surface care product that safely removes the bonded contamination that washing leaves behind. With SmartClay, insect remains, paint overspray, industrial fallout, brake dust, tar spots and tree sap are erased away like magic. Use the SmartClay bar in conjunction with a quick detail spray (to lubricate the surface). SmartClay glides over the surface, removing the protruding contamination. Claying is an important step in proper finish care (prior to polishing and waxing).
Heavily Weathered Marine Finishes: Apply PaiBoat Just 1 (by machine polisher) or PaiBoat Extra Cut (by hand).
PaiBoat Extra Cut - This is a super cutting compound designed to be easily used by hand to remove heavy oxidations, bad scratches and severe chalking from boats. It assures both an excellent cutting action and a very good final gloss, restoring the surface to its original condition. Its balanced formulation allows for a quick and efficient application as well as making it extremely fast and simple to remove. It can also be applied by machine polisher with optimal results.
* PaiBoat Extra Cut (Compound) >>> PaiBoat Speedy Fix (Optional: Polish) >>> PaiBoat UV Shield (Sealant & Wax)
PaiBoat Just 1 - Cutting polishing liquid compound 2 in 1, which combines an excellent restoring action with a supreme gloss finish. It removes either medium oxidation, marks and yellowing or medium-fine sand scratches (P1000-P1500, according to the hardness of treated resins), very fast and well, without overheating the surface. Just 1 is the quickest and most effective way to restore the deep shine of the surface back to a like-new condition with just one product and without a waste of time and material.
* PaiBoat Just 1 (One-Step Compound) >>> PaiBoat Topfinish 2 (Optional: Polish) >>> PaiBoat UV Shield (Sealant & Wax)
Previously Compounded Marine Finishes and Refinishing Dark Colours: Apply PaiBoat Topfinish 2 (by machine polisher).
PaiBoat Topfinish 2 - This is a nano-abrasives based refinishing polish able to permanently remove swirls, polishing marks resulting from previous coarse compounds and holograms, which are more visible on dark colours. Topfinish 2 is the best solution for final polishing, even on the most delicate and difficult surfaces. Thanks to its balanced and effective blend of nano-abrasives and high performance polishing agents, it allows you to achieve the highest standard of perfection and brightness in a safe, simple and quick way.
* PaiBoat Topfinish 2 (Refinishing Polish) >>> PaiBoat UV Shield (Sealant & Wax) >>> PaiBoat Flash Touch (Detail Spray)
Lightly Weathered Marine Finishes: Apply PaiBoat Speedy Fix or Driven Finish Restorer (by hand or machine polisher).
PaiBoat Speedy Fix - This is an innovative boat renewer, used to easily remove light oxidations, yellowing, minor chalking and stains. Designed to be effortlessly applied by hand, it restores the surface to an outstanding shine and deep gloss, quickly and effectively removing defects, black streaks as well as pollution marks. It can also be applied by machine polisher, assuring ease of use, fast finish and amazing results.
* PaiBoat Speedy Fix (Restorative Polish) >>> PaiBoat UV Shield (Sealant & Wax) >>> PaiBoat Flash Touch (Detail Spray)
Driven Finish Restorer - This dramatically different premium grade glazing compound was designed using the very highest quality of ultra fine micro abrasives to achieve world class results. These precision abrasives with numerous exterior facets and extremely sharp edges are the critical element for safe removal of oxidation, heavy water spots, surface contaminants, stains and light surface scratches. Driven Finish Restorer simultaneously feeds the finish with a full spectrum of essential polymers and oils resulting in a phenomenal shine. Safe for all marine and automotive finishes including GRP (fibreglass), gelcoat, paintwork and all types of metal. This unique combination of safe cleaning and nourishing is sure to bring out the very best in your finish.
* Driven Finish Restorer (Polish & Glaze) >>> Driven Marine Polish (Cleaner & Sealant) >>> Driven Quick Spray (Detailer)
Well-Maintained Marine Finishes: Apply PaiBoat Easy Gloss (by hand). Maintain surface/finish with PaiBoat Flash Touch.
PaiBoat Easy Gloss - This is a renewer protective polish, which gives high gloss finishing while adding wax protection on gelcoat and composite surfaces. It safely removes light oxidation, stains and water spots, restoring the original deep shine of the surface; at the same time, it helps stop fading caused by UV rays, natural elements, salt water and chalk. Thanks to its advanced formula made of next-generation polymers, Easy Gloss adheres to the surface, thus leaving an enduring protective and water-repellent film, as well as an unbelievable slick finish and radiant shine. It is very fast to apply with a foam applicator pad (by hand or machine polisher) and extremely easy to remove. Unlike many other polishing products on the market, it can be wiped off effortlessly, even after several hours.
* PaiBoat Easy Gloss (AIO Polish & Protective Sealant/Wax) >>> PaiBoat Flash Touch (Detail Spray / Protective Detailer)
Well-Maintained Marine Finishes: Apply Driven Marine Polish (by hand). Maintain surface/finish with Driven Quick Spray.
Driven Marine Polish is the best of the best. It’s loaded with the material necessary to hold up and protect in all harsh marine environments including intense sun and saltwater exposure. Driven Marine Polish can be used on all marine finishes and windows, giving your fibreglass, gelcoat or paintwork a beautiful high gloss wet look with incredible depth and clarity. Driven Marine Polish can be applied in sun or shade and once applied, environmental contaminants refuse to stick and easily wash off. We recommend applying twice a year for incredible results. Driven Marine Polish safely cleans and protects: fibreglass, gelcoat, paintwork (all paint types), glass, plexiglass, polycarbonate, high-gloss plastics, decals, chrome, polished aluminium, anodised aluminium, stainless steel, brass, bronze, copper and much more. Driven Marine Polish seals and protects against harsh marine elements: UV rays, water spots, salt spray, bugs, bird droppings, algae, barnacles, fish blood, fish scales, fuel, oil, exhaust fumes and dock marks.
* Driven Marine Polish (Cleaner Polish & Protective Sealant) >>> Driven Quick Spray (Detail Spray / Protective Detailer)
New or Like-New Marine Finishes: Apply PaiBoat UV Shield (by hand). Maintain surface/finish with PaiBoat Flash Touch.
PaiBoat UV Shield - Super protective and ultra-performing wax for gelcoat and composite materials, with amazing water beading properties and highly weather resistant. It leaves a thin but tough film that anchors to the surface, keeping it shiny and protected from UV rays, weathering, pollution, tree sap and bird droppings. UV Shield has been specifically formulated by our lab to assure a real protective shield that lasts a season. Thanks to its balanced blend of UV ray inhibitors, Carnauba waxes and polymers, it feeds and restores the original deep shine of surfaces, leaving a protective water repellent barrier and a rich gloss that lasts for a long time.
* PaiBoat UV Shield (Protective Sealant & Carnauba Wax) >>> PaiBoat Flash Touch (Detail Spray / Protective Detailer)
PaiBoat Flash Touch - This is an anti-haze polish spray (quick detailing spray) with excellent cleaning properties. It allows you to clean, shine and protect multiple surfaces in only one step. It may be used on fibreglass (GRP), gelcoats, painted surfaces, plastics, rubber and glass (not windscreens), leaving an unbelievable shine for a long time.
Driven Quick Spray Concentrate is an exceptional quick detailer for removing fresh surface contaminants and newly formed water spots from all hard surfaces including paintwork, gelcoat, fibreglass, metal, plastic and glass. This unique formulation can be applied in direct sunlight, and works by combining biodegradable cleaners, the power of citrus, and a full spectrum of essential polymers and oils. It will not remove polish or wax, but does allow fresh contaminants and newly formed water spots to be wiped away without streaking. This incredible formula not only cleans, it brightens; adding depth, brilliance and non-stick protection to all high gloss finishes.
FINISH CARE: FIBREGLASS (GRP) & GELCOAT CARE PRODUCTS
SLIPSTREAM is an e-commerce business (B2C eShop). We supply detailing products to online shoppers via Click & Collect.
We ask you to read through the "Finish Care" webpage and to please help yourself. Your cooperation is well-appreciated.
You can shop/buy online with confidence; secure website, shopping cart, checkout, and payment processing (via PayPal).
Please add the products you would like to order to your basket. You can buy now or order now and pay later. Thank you.
You may collect your purchased items by appointment only (Monday to Friday, 19:00 - 21:00; or Saturday, 10:00 - 20:00).
Please schedule a specific collection time, and await an email message with our location (via N51; 2.5 km outside Navan).
We do not operate a B&M store. Our location is a meeting point for customers to collect prepaid orders by appointment.
Please select An Post Parcel Post at checkout. Your parcel will be dispatched next business day via An Post Express Post.